|
|
Build Your Online Product Catalogs?
| Product Name: |
manual mold silicone rubber
|
| Supply Ability: |
|
| Related proudcts |
silicone rubber, rtv-2 silicone rubbe, silicone rubber for, |
| Specifications |
resistance to deformation, good tensile strength as well as low |
| Price Term: |
FOB |
| Port of loading: |
shenzhen |
| Minimum Order |
200 Kilogram |
| Unit Price: |
3.9-5.2usd/kg |
|
Manual mold silicone rubber applications
Manual mold silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Manual mold silicone rubber features description
1 Good elasticity
2 Non-deformation
3 Heat resistance
4 Low shrinkage
Model Codes of Manual Mold Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540# co***red to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment antivibration.
Manual mold silicone rubber operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.
(Note: our co***ny does not recommend you to add silicon oil. If a special soft silicon mold or fine ***ailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demolding.)
Frequently asked questions for manual mold Silicon rubber
1. What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicon rubber will slow down, s |
| Company: |
Shenzhen Hong Ye Jie Technology Co., Ltd
|
| Contact: |
Ms. jessica xiao |
| Address: |
Building 4, No.6 Laiying Road, Xin Sheng Long Shan Industrial Zone，Long Gang District, Shenzhen，Guangdong，China |
| Postcode: |
518117 |
| Tel: |
86-0755-89948294 |
| Fax: |
86-0755-89948030 |
| E-mail: |
|
|
|
|
Home
